Description of production
1. Application Scope
The Outdoor Telecom Cabinet is mainly used in communication base
station, such as 4G system, communication/network integrated
service, access/transmission switching station, emergency
2. Cabinet Introduction
2.1 Cabinet Material
The cabinet is made of galvanized steel, with double walls,
thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm.
There are heat insulation between inner wall and outer wall. The
insulation material is 40mm PEF, heat insulation coefficient:
0.035W/m·K. The cabinet is assembled type.
2.2 Cabinet Structure
The cabinet includes 19” equipment installation rack. The cabinet
includes two air conditioners, one installed on front door and the
other installed on back door.
2.3 Cabinet Door and Lock
The cabinet includes one front door and one back door. The cabinet
door uses embedded structure. The door opening angle is larger than
110°and the door limit device can limit the opening angle. The lock
is theftproof three point lock, supporting padlock. Each cabinet
door include open door sensor, working together with the
environment monitoring unit.
3.1 The cabinet is dustproof, sunproof and rainproof, which is used
in outdoor environment.
3.2 The cabinet cooling uses air conditioner.
3.3 Including -48VDC illumination LED lamp.
3.4 The cabinet includes power and environment monitoring unit,
which can send power failure alarm, door open alarm, temperature
and humidity alarm, smoke alarm, water alarm etc.
3.5 The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. At the bottom of the cabinet,
there are cable inlets separately for power cable, signal cable and
3.6 All the cables, sealing and heat insulation used in the cabinet
are made from flame retardant materials.
3.7 The cabinet includes 19” standard installation rack.
4. Technical Specs
(1) Applicable environment conditions:
Operating temperature: -40°C ~ + 55°C
Storage temperature: -50°C ~ + 70°C
Transport temperature: -50°C ~ + 70°C
Relative humidity (RH): 5%~99%
Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)
(2) Material: good quality galvanized steel
(3) Surface treatment: degreasing, derusting, rustproof phosphating
(or galvanizing), powder coated.
(4) Cabinet load bearing: ≥600kg
(5) Ingress protection: IP65
(6) Flame retardance: comply with GB5169.7 test A
(7) Insulation resistance: the insulation resistance between
grounding devices and cabinet body parts is not lower than
(8) Withstand voltage: the withstand voltage between grounding
devices and cabinet body parts is not lower than 3000V(DC)/1min.
(9) Mechanical strength: each surface can bear upright pressure
>980N; after the door is open, its outer end can bear upright
Trade & Market
41% - 50%
Have Own Export License
No. of Employees in Trade Department: