Pole Mounted Outdoor Telecom Cabinet
The DDTE002B Pole Mounted Cabinet is mainly used in wireless
communication base station, such as 3G system,
communication/network integrated service, access/transmission
switching station, emergency communication/transmission, etc.
The cabinet is made of hot dip galvanized steel, double walls
structure. There are heat insulation between the two walls. It is
easy for installation and with perfect sealing performance.
Equipment Compartment: The DDTE002B Cabinet is used for installing telecom equipments.
The cabinet is a double-wall cabinet, with 20mm heat insulation
between the two walls. It uses 4 fans for cooling. It is sunproof
Door and Door Lock: The cabinet door uses embedded structure. The door opening angle
is larger than 110° and the door limit device can limit the opening
angle. The lock is theftproof three point lock, supports padlock.
Cabinet External Size : 435mm×460mm×736mm (W×D×H),
Cabinet Internal Size : 6U× 380×19” (W×D×H)
3. Cabinet Layout
4.1 The cabinet is dustproof, sunproof and rainproof, which is used
in outdoor environment.
4.2 The cabinet use fans for cooling.
4.3 The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. There’re entrance holes
individually for power cable, signal cable and optical cable.
4.4 All the cables used in the cabinet are made from flame
5. Technical Specs
5.1 Applicable environment conditions:
Environment temperature: -40°C ~ + 60°C
Environment humidity (RH): ≤95% (at + 40°C)
Air pressure: 70kPa ~ 106kPa
5.2 Material: hot dip galvanized steel
5.3 Surface treatment: degreasing, derusting, rustproof phosphating
(or galvanizing), powder coated.
5.4 Cabinet load bearing: ≥600kg
5.5 Ingress protection: IP55
5.6 Flame retardance: comply with GB5169.7 test A
5.7 Insulation resistance: the insulation resistance between
grounding devices and cabinet body parts is not lower than
5.8 Withstand voltage: the withstand voltage between grounding
devices and cabinet body parts is not lower than 3000V(DC)/1min.
5.9 Mechanical strength: each surface can bear upright
pressure＞980N; after the door is open, its outer end can bear
upright pressure ＞200N.
7. Packing, Transport and Storage
The cabinet packing is wooden case, which is damp proof and shock
proof. The outside of the packing is painted with damp proof sign,
shock proof sign, direction sign, etc.
The cabinet can be transported by various transportation ways.
During the transportation, the environment temperature should be
-30°C~+55°C, the relative humidity should be ≤90%(at +30°C). There
should be a awning to prevent the product from rain and sunshine.
Loading, unloading and moving of the product should be carried
according to the transportation signs painted on the packing.
In the warehouse, the acid gas, alkaline gas or other harmful gas
should comply with the environment protection requirement.