|Place of Origin: Shenzhen, China (Mainland)|
External Dimension:W×D×H 700x600x850mm
Internal Dimension:W×D×H 610x510x640mm
|Brand Name: ESTEL||Structure: single wall|
|Model: ET706085PWF-S||Cabinet Layout: one compartment, for installing equipment and
|Product Name: Outdoor Wall / Pole / floor Mounted Cabinet||Protection Level: IP55|
|Certification: ISO9001, CE, 3C, FCC, TLC, IP65||Cabinet Lock: anti-theft three point lock|
|Application: outdoor telecom base station||Cable Entry: at cabinet bottom|
|Material: galvanized Steel||Illumination: DC48V LED lamp|
|Color: grey (support custom made)||Grounding: copper bar|
|Coating: anti-corrosion outdoor powder coating||Cooling: fans|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Payment Terms:||T/T, L/C etc.|
|Supply Ability:||8,000 sets per month|
|Delivery Time:||15-20 working days|
|Packaging Details:||wooden case|
The ET706085PWF-S wall / pole / floor mounted outdoor telecom
cabinet is widely used in wireless communication base station, such
as 3G system, communication/network integrated service,
access/transmission switching station, emergency
|Structure||Dimension||External Dimension:W×D×H 700x600x850mm Internal Dimension:W×D×H
|Equipment Installation Method||19” standard rack and tray|
|Door||With one front door, and anti-theft three point lock for outdoor
cabinet (support padlock)|
|Temperature Control||Cooling||DC48V fans|
|Lighting||LED lamp||48V LED lamp|
|Temperature||Temperature||Working Temperature: -20°C ~ 55°C|
|Storage Temperature: -40°C ~ + 70°C|
|Transport Temperature: -50°C ~ +70°C|
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1124 × (1±5%)W/m2|
|1||Outdoor Pole/Wall Mounted Cabinet||1||Set|
(1) External Dimension:W×D×H 700x600x850mm
(2) One compartment: the upper compartment is used for installing
equipment, the lower compartment is used for installing battery
(3) With one front door and anti-theft three point lock for outdoor
cabinet (support padlock)
(4) Material: single wall, galvanized steel, 1.5mm thickness.
(6) Supporting three installation methods: pole mounted , wall
mounted and floor mounted
|2||Fan||2||PC||DC48V, installed on the top|
|3||Door Sensor||1||PC||Used for door open alarm|
|4||LED Sensor||1||PC||Ued for controlling LED lamp on /off|
|5||LED Lamp Sensor||1||PC||DC48V|
The cabinet is made of hot dip galvanized steel, single wall
structure. It is easy for installation and with perfect sealing
Equipment Compartment: The ET706085PWF-S cabinet is used for installing telecom
equipments and battery. The cabinet is a single-wall cabinet, with
heat insulation between the two walls. It uses 4 fans for cooling.
It is sunproof and waterproof.
Door and Door Lock: The cabinet door uses embedded structure. The door opening angle
is larger than 110° and the door limit device can limit the opening
angle. The lock is theftproof three point lock, supports padlock.
Cabinet External Size : 700x600x850mm (W×D×H)
Cabinet Internal Size : 610x510x640mm (W×D×H)
5.1 The cabinet is dustproof, sunproof and rainproof, which is used
in outdoor environment.
5.2 The cabinet use fans for cooling.
5.3 The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. There’re entrance holes
individually for power cable, signal cable and optical cable.
5.4 All the cables used in the cabinet are made from flame
6. Technical Specs
6.1 Applicable environment conditions:
Environment temperature: -40°C ~ + 60°C
Environment humidity (RH): ≤95% (at + 40°C)
Air pressure: 70kPa ~ 106kPa
6.2 Material: hot dip galvanized steel
6.3 Surface treatment: degreasing, derusting, rustproof phosphating
(or galvanizing), powder coated.
6.4 Cabinet load bearing: ≥600kg
6.5 Ingress protection: IP55
6.6 Flame retardance: comply with GB5169.7 test A
6.7 Insulation resistance: the insulation resistance between
grounding devices and cabinet body parts is not lower than
6.8 Withstand voltage: the withstand voltage between grounding
devices and cabinet body parts is not lower than 3000V (DC) /1min.
6.9 Mechanical strength: each surface can bear upright
pressure＞980N; after the door is open, its outer end can bear
upright pressure ＞200N.
7. Cable Entrance
All outside cables use bottom entrance method.
8. Grounding Protection
(1) The cabinet includes grounding copper bar with anti-corrosion
coating. There are enough screws for wiring connection terminals.
(2) The metal part of the cabinet should be interconnected and be
connected with grounding bar. Connection resistance between any two
points is lower than 0.1Ω.
9. Theft Proof Design
9.1 Door lock theft proof design
(1) Damage resistance of the theft proof lock meets GA/T 73-1994
“Mechanical Anti-theft Lock” class B requirement, supporting
(2) Three point lock
9.2 Connection and Fastening
(1)Use anti-loose threaded connection as structure and bearer
connection. Anchor bolt for fixing cabinet use hot dip galvanized
(2)Door hinges use inner hinge mode.
9.3 Appearance and Surface Treatment
Cabinet surface coating is outdoor special powder coating, with
white gray color (PANTONE 428C). The coating complies with GB/T
9.4 LED lamp, LED lamp sensor and door sensor are installed at the
top of the cabinet.
9.5 Water sensor is installed at the bottom of the cabinet.
9.6 Two fans are installed on the top of the cabinet
11.Installation Method-Three Mounted Methods For Option
(1) Wall Mounting
(2.1) Steel Banding System
(2.2) Mounting Bracket
(3) Floor Mounted
15. Packing and Shipping
The cabinet packing is wooden case in compliance with GB3873-83,
damp proof and shock proof. The outside of the packing is painted
with damp proof sign, shock proof sign, direction sign, etc.