Flexible Assembly Energy Saving Outdoor Telecom Cabinet, Used For Outdoor Various Weathers, Anti-corrosion Powder Coating
The Outdoor Telecom Cabinet, made from metallic material or
non-metallic material, can be used under various weathers and
climates, providing outdoor physical work environment and safety
system for wireless telecom station or wired network station.
Operators without permission are not allowed to get access to the
The cabinet is suitable for outdoor environment, such as road side,
park, building roof, mountain area, flat ground, etc. The cabinet
can be installed with base station equipments, power supply
equipments, batteries, temperature control equipments, transmission
equipments and other equipments, or the cabinet can reserve
installation space and heat exchange capacity for the above
equipments, providing reliable mechanical and environmental
protection for normal operation of the internal equipments.
ESTEL’s Energy Saving Integrated Cabinet provides complete
solutions for outdoor working environment and safety management of
telecom base station. As a base station, it can integrate the main
equipments, system power supply, AC and DC power distribution,
environment monitoring, batteries, lightning protection and
grounding devices. As functional cabinet (battery cabinet, power
supply cabinet, transmission cabinet etc.), it can help telecom
carriers to realize easy station obtaining, energy saving, fast
The cabinet is weatherproof, such as sun-proof, dust-proof and
rainproof, which is used in outdoor environment.
Cabinet cooling: air conditioner and auxiliary direct ventilation
Cabinet load bearing: ≥600kg
Ingress protection: IP55
The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. There are entrance holes
individually for power cable, signal cable and optical cable.
All the cables used in the cabinet are made from flame retardant
The cabinet includes grounding bar.
Surface treatment: degreasing, derusting, rustproof phosphating
(or galvanizing), powder coated.
Flame retardance: comply with GB5169.7 test A
Insulation resistance: the insulation resistance between grounding
devices and cabinet body parts is not lower than 2×104M/500V(DC).
Withstand voltage: the withstand voltage between grounding devices
and cabinet body parts is not lower than 3000V(DC)/1min.
Mechanical strength: each surface can bear upright pressure
>980N; after the door is open, its outer end can bear upright
Compartment type design
(2)Standard compartment temperature control
Multiple temperature control modes optional
High efficiency and energy saving
High compatibility, high integration
Supporting multiple equipments, good appearance
(4) Fast deployed
Can be assembled, easy for transportation
Modular assembly, short installation time
(1) Technical Parameters
External Dimension: W×D×H 900×900×2100mm
Internal Dimension: W×D×H 800×800×1800mm
|Equipment Installation Method||19” rack|
|Door||With one front door, and anti-theft three point lock for outdoor
cabinet (support padlock)|
|Material||Galvanized steel, sandwich structure with double wall and heat
|Heat Insulation||There are heat insulation between inner wall and outer wall.|
|Temperature Control||Cooling||AC110V 60Hz air conditioner and DC48V fans|
|Lightning Proof||Grade B lightning proof||Nominal: 60KA, Max.: 100KA|
|Lighting||LED lamp||48V LED lamps (immovable), with protective circuit breaker|
|Temperature||Temperature||Working Temperature: -40°C ~ +55°C|
|Storage Temperature: -50°C ~ + 70°C|
|Transport Temperature: -50°C ~ +70°C|
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1120 ×(1±5%)W/m2|
(2) Configuration List
|1||Outdoor Telecom Cabinet||1||Set|
(1) External Dimension:W×D×H 900×900×2100mm
Internal Dimension: W×D×H
(2) One compartment: equipment compartment
(3)With one front door, and anti-theft three point lock for outdoor
cabinet (support padlock)
(4.1) Cabinet left side, right side and back: sandwich structure
panel, outer plate: 0.5mm galvanized steel, inner plate: 0.5mm
galvanized steel, insulation: 45mm flame retarded EPS.
(4.2) Cabinet door and base: outer plate: 1.5mm galvanized steel ,
inner plate: 0.8mm galvanized steel, insulation: 40mm PEF.
(4.3) Cabinet roof: sandwich structure panel (outer plate: 0.5mm
galvanized steel, inner plate: 0.5mm galvanized steel, insulation:
45mm flame retarded EPS. ) + 1.0mm galvanized steel.
Cooling capacity: 1.5KW,
Power supply: AC110V, 60HZ,
|3||Auxiliary Direct Ventilation Fans||2||PC||DC48V|
|4||Environment Monitoring Unit||1||Set||19", 1U; Model: SM2400, Power Supply: AC110V Including utility
power alarm function|
|7||Temperature and Humidity Sensor||1||PC|
|8||Door Sensor||2||PC||One for controlling LED lamp, the other for open door alarm|
|10||Power Distribution Unit||1||Set|
Grade B Lightning Proof
AC Input: 63A/2P *1;
AC Output: 16A/1P*4;
DC Output: 16A/1P*4
Input Voltage: AC110V.
5.1 Components Installation
LED lamp, LED lamp sensor, smoke sensor and door sensor are
installed at the top of the cabinet. Environment monitoring unit
and PDU are installed on 19” rack. Water sensor is installed at the
bottom of the cabinet.Temperature and humidity sensor is installed
at the side inside the cabinet. Air Conditioner and fans are
installed on the door of the cabinet.
5. 2 Cable Inlet
Feeder cable and other external cables all use bottom wiring
5.3 Grounding Protection
(1)The cabinet includes grounding copper bar with anti-corrosion
coating. There are enough screws for wiring connection terminals.
(2)The metal part of the cabinet should be interconnected and be
connected with grounding bar. Connection resistance between any two
points is lower than 0.1Ω.
(3) Protective earthing of other equipments inside the cabinet
should be connected to the grounding bar.
5.4 Door lock theft proof design
Damage resistance of the theft proof lock meets GA/T 73-1994
“Mechanical Anti-theft Lock” class B requirement, supporting
Three point lock
5.5 Connection and Fastening
(1) Use anti-loose threaded connection as structure and bearer
connection. Anchor bolt for fixing cabinet use hot dip galvanized
(2) Door hinges use inner hinge mode.
5.6 Appearance and Surface Treatment
Cabinet surface coating is outdoor special powder coating, with
white gray color (PANTONE 428C). The coating complies with GB/T